Intel Scenic Edition X101 - Manual (Page 12)

12
Post Delay Time (in seconds):
Allow you to set the amount of time. The Setup Utility prompt (F10=Setup) appears
when the computer boots.
None: Post Delay Time disable (Default)
5: Post Delay 5 seconds
15: Post Delay 15 seconds
25: Post Delay 25 seconds
35: Post Delay 35 seconds
System Keyboard:
Allows you to set the System Keyboard detect or not when computer boots.
Absent: System Keyboard not detect (Default)
Present: System Keyboard detect
APIC ACPI SCI IRQ:
Allows you to enable or disable the internal I/O APIC and Multiprocessor Tables.
(Disable the APIC ACPI SCI IRQ may require the O.S. to be reinstalled)
Enable: IRQ 20-23 (Default)
Disable: IRQ 09-11
Hyper-Threading Technology:
Allows you to enable or disable the Intel Hyper-Threading Technology. (This item only
selectable when Intel HTT CPU is plugged –in)
Enable: Intel HTT function enable (BIOS auto detect)
Disable: Intel HTT function disable (BIOS auto detect)
Internal Graphic Mode Select
Allows you to select the size of memory for the internal graphic adapter.
Disable: Internal Graphic Mode Select disable
512KB: Share 512KB
1MB: Share 1MB
8MB: Share 8MB (Default)
4. Power Management Setup
The Power Management Setup screen is used to configure power management
features.
ACPI Standby State:
Allows you to set the ACPI Standby State when system into the ACPI Standby Mode.
S1/POS: Power on Suspend
S3/STR: Suspend to RAM (Default)