Impex PREMIER - Manual (Page 16)

STEP 10 (See Diagram 10)
A.) Cover the Weight stack by two Weight Stack Covers (#19). Secure each Weight Stack Cover
with two M10 x ¾” Allen Bolts (#72) and
∅
¾” Washers (#81).
B.) Connect the Lat Bar (#17) to the Upper Cable (#26) with two C-clips (#45) and one Short
Chain (#40).
C.) Connect the Arm Curl Handle (#18) to the Lower Cable (#27) with two C-clips (#45) and one
Long Chain (#39).
DIAGRAM 10
15