Personalisations, Setting the temperature, Setting the spin speed – Indesit WIXXL 86 User Manual

Page 7: Options

Advertising
background image

7

GB

Setting the temperature

Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 6).
The temperature can be lowered, or even set to cold wash ( ).

Setting the spin speed

Turn the SPIN SPEED knob to set the spin speed for the programme selected.
The maximum spin speeds for each programme are as follows:

Programmes

Maximum spin speed

Cotton

800 r.p.m.

Synthetics

800 r.p.m.

Wool

600 r.p.m.

Silk

no

The spin speed can be lowered, or the spin cycle can be excluded altogether by selecting the symbol .
The washing machine will automatically prevent you from selecting a spin speed higher than the maximum speed
for each programme.

Options

To enable an option:
1. press the button corresponding to the desired option, according to the table below.
2. the option is enabled when the corresponding button is illuminated.

Note: The rapid flashing of the button indicates that the corresponding option cannot be selected for the
programme set.

Personalisations

Tr9231gb_WIXXL86-Indesit.p65

20/01/05, 14.39

7

Option

Effect

Comments

Enabled with

programmes

Delay Timer

Delays the start of the
wash by up to 9
hours.

Press the button repeatedly until the LED corresponding
to the delay is turned off.
The fifth time the button is pressed, the option will be
disabled.
N.B. Once you have pressed the Start/Reset button, the
delay can only be decreased if you wish to modify it.

All

Mini Load

For washing a smaller
load.

In addition to reducing actual washing time, this option will
reduce water and energy consumption by up to 50%.
Note: You can reduce the amount of detergent you use
with this wash.

1, 2, 3, 4, 5

Rinse cycle

Easy Iron

This option reduces
the amount of
creasing on fabrics,
making them easier
to iron.

When this option is set, programmes 4, 5, 6 and 7 will end
with the laundry left to soak (Anti-crease) and the Rinse
cycle phase LED will flash.
- to conclude the cycle, press the START/RESET button.
- to run the draining cycle alone, set the knob to the
relative symbol and press the START/RESET button.

3, 4, 5, 6, 7,

8, 9, 10,

Rinse cycle

Extra Rinse

Increases the
efficiency of the rinse.

Recommended when the appliance has a full load or with
large quantities of detergent.

1, 2, 3, 4, 5,

8, 9, 10, 12, 13

Rinse cycle

Advertising
This manual is related to the following products: