IBM DS8000 - Manual (Page 228)

206 DS8000 Series: Concepts and Architecture
Figure 10-14 The fully expanded Simulated manager menu choices
The following items should be considered as first steps in the use of either of these modes.
Log in
Logging in to the DS Storage Manager requires that you provide your user name and
password. This function is generally administered through your system administrator and
by your company policies.
The preconfigured userid and password is as follows:
userid = admin
password = admin
Creating and defining the users and passwords
Click User administration, as shown in Figure 10-15 on page 207, to add users and set
passwords. The names and passwords must conform to the following standards:
– The user name can be up to 16 characters.
– Passwords must contain at least 5 alphabetic characters, and at least one special
character, with an alphabetic character in the first and last positions. Passwords are
limited to a total of 16 characters. The user name cannot be part of the password. This
entry will appear as asterisks.