IBM DS8000 - Manual (Page 238)

216 DS8000 Series: Concepts and Architecture
10.3.3 Configuring the logical host systems
To create a logical host for the storage unit that you just created, click Host Systems as
shown in Figure 10-29. You may want to expand the work area.
Figure 10-29 Create host systems, screen 1
You can expand the view by clicking the left arrow in the My Work area as shown in
Figure 10-29; the expanded view is shown in Figure 10-30.
Figure 10-30 View of Host Systems panel, with the Go button selected
Click the Select Storage Complex action pull-down, highlight the storage complex you wish to
configure, then click
Create and Go. The screen will advance to the General host information
panel shown in Figure 10-31 on page 217.
Expand the Work area
Host Systems