IBM LCD PC - Manual (Page 46)

I n d u s t r i a l P a n e l P C s O n y x - 1 5 8 / S
Onyx-158/S Series User Manual V1.2 46
Load Fail-Safe Defaults
When you press <Enter> on this item you get a confirmation dialog box with a
message similar to:
Load Fail-Safe Default (Y/N)?
Pressing "Y" loads the BIOS default values for the most stable, minimal
performance system operations.
Load Optimized Defaults
When you press <Enter> on this item you get a confirmation dialog box with a
message similar to:
Load Optimized Defaults (Y/N)?
Pressing “Y” loads the default values that are factory settings for optimal
performance system operations
Set Supervisor Password
You can set either SUPERVISOR or USER PASSWORD, or both of them. The
difference between the two is that the supervisor password allows unrestricted
access to enter and change the options of the setup menus, while the user password
only allows entry to the program, but not modify options.
To abort the process at any time, press Esc.
In the Security Option item in the BIOS Features Setup screen, select System or
Setup:
System Enter a password each time the system boots and when-
ever you enter Setup.