Presentation features, Optimizing video images, Customizing the projector – IBM Partner Pavilion iLV300 User Manual
Page 32
Presentation features
The following are presentation features provided. For more information, see
Chapter 5, “Using the menus”, on page 5-1.
v
The Effect button on the remote allows you to assign various features to the
button. The default effect is About, which displays information about the
projector and current source. You can select among Blank, Mute, Aspect Ratio,
Source, Auto Image, Freeze, Zoom, and About. For more information, see
“Settings menu” on page 5-5. The freeze effect allows you to freeze the displayed
image. This is useful if you want to make changes on your computer without
your audience seeing them. The mask effect allows you to cover part of the
image with a black curtain.
v
The Blank button on the remote allows you to display a blank screen instead of
the active source. For information on determining the color of this screen, see
“Settings menu” on page 5-5.
v
The Startup Logo option lets you change the default start up screen to a blank
or default screen. For more information, see “Settings menu” on page 5-5.
v
Two options, Power Save and Screen Save, are provided to automatically shut
down the projector after several minutes of inactivity or display a black screen.
This helps preserve lamp life. For more information, see “Settings menu” on
page 5-5.
Optimizing video images
After your video device is connected properly and the image is on the screen, you
can optimize the image using the onscreen menus. For general information on
using the menus, see Chapter 5, “Using the menus”, on page 5-1.
v
Adjust the Keystone, Contrast, Brightness, Color, or Tint in the Picture menu.
v
Change the Aspect Ratio. Choose the option that best fits your input source.
v
The remote’s Effect button allows you to assign various features to the button.
The default effect is About, which displays information about the projector and
current source. You can select among Blank, Mute, Aspect Ratio, Source, Auto
Image, Freeze, Zoom, and About. See “Settings menu” on page 5-5 for details.
v
Select a Sharpness setting. For more information, see “Advanced menu” on
page 5-3.
v
Use the Color Control to adjust the color gain. For more information, see
“Advanced menu” on page 5-3.
v
Adjust the Color Temperature. Select a listed warmth value. For more
information, see “Advanced menu” on page 5-3.
v
Turn on Overscan to remove noise on the edges of the image.
Customizing the projector
You can customize the projector for your specific setup and needs. See “Settings
menu” on page 5-5 for details on these features.
v
For rear projection, turn rear mode on in the Settings > System menu.
v
For ceiling mounted projection, turn ceiling mode on in the Settings > System
menu.
v
Specify which source the projector checks first for active video during power-up.
v
Specify the function of the Effect button on the remote.
v
Turn the projector’s display messages on and off.
4-6
IBM iLV300 Value Data/Video Projector: User’s Guide