IBM Partner Pavilion iLV300 - Manual (Page 41)

The functions listed on the Effect Key menu are:
– Blank: Displays an empty screen.
– Mute: Turns off all sound.
– Aspect Ratio: Toggles among 4:3, 16:9, and Native (see “Connecting a video
device” on page 3-1 and “Picture menu” on page 5-2). Set as the Effect key, it
can allow you to switch the Aspect Ratio for DVDs.
– Source: Cycles through available sources.
– Auto Image: Resets the projector to the source. For more information, see
“Using the keypad buttons” on page 4-5.
– Freeze: Pauses the projected image.
– Zoom: Allows you to magnify part of the image. Press Effect, then press the
left mouse button to zoom the image. Use the cursor control to pan the image
while it is zoomed. Press the right mouse button to decrease the
magnification. Press the Effect button to cancel zoom and return to normal
magnification.
– About: The default effect. It opens a window with projector and source
information.
v Language : Enables you to select a language for the onscreen display.
v Service : To use the Service features, highlight them and press Select. Figure 5-19
shows the Service menu.
The Service menu has the following settings:
– Factory Reset: Restores all settings to their default.
– Lamp Reset: Resets the lamp hours used counter in the About menu to zero.
Do this only after changing the lamp.
– Service Code: Only used by authorized service personnel.
About menu
The About menu provides a read-only display of information about the projector
and the active source. The default of the Effect button is to show the About menu.
Figure 5-20 on page 5-8 shows the About menu.
Figure 5-18. Effect Key menu
Figure 5-19. Service menu
Chapter 5. Using the menus 5-7