Intel M600 - Manual (Page 13)

3 Chapter 1
1.3 Specifications
Standard SBC Functions
• CPU: Embedded Intel
®
Celeron
®
M 600
• BIOS: Award 512 KB Flash memory
• System memory: Two 184 pin DIMM sockets, support ECC
Double Data Rate (DDR)128 MB to 2 GB, accepts 128/256/512/1000
MB DDR200/266 DRAM.
• System chipset: 852GM GMCH/ICH4 chipset 400Mhz FSB
• 2nd cache memory: N/A
• Enhanced IDE interface: Two channels supports up to four EIDE
devices. BIOS auto-detect, PIO Mode 3 or Mode 4, UDMA 100 trans-
fer. Primary IDE support up to UDMA 66/100 mode
• FDD interface: Supports one FDD (optional)
• Serial ports: Three serial RS-232 ports, one serial RS-232/422/485
ports
• Parallel port: One parallel port, supports SPP/EPP/ECP mode
• Keyboard/mouse connector: Supports standard PS/2 keyboard and a
PS/2 mouse
• Power management: Supports power saving modes including Normal/
Standby/Suspend modes. APM 1.2/ACPI compliant
• Watchdog timer: 255-level timer intervals, from 15sec to 14835 sec,
setup by software, jumperless selection, generates system reset
• USB: Six USB 2.0 compliant host ports
• IrDA: 115 Kbps, IrDA 1.1 compliant
• GPIO: 8-bit general purpose input/output
• Expansion:Supports PCI2.2 with 32-bit/33 MHz slot and Mini-PCI
interface.
Solid State Disk
• Supports one 50-pin socket for CFC type I/II