Iluv IMM173 - Manual (Page 7)

OPERATIONAL INSTRUCTIONS
You can set the iMM173 to play music from your iPod, iPhone, or Radio as you go to sleep. The unit
will turn off automatically after the time you set in Sleep mode.
1. In FM, iPod, or AUX, you can activate the sleep mode by pressing the SLEEP button on the main unit.
2. Press the SLEEP button while the unit is already playing or in standby mode to display the sleep time.
3. Setting: 120 ->90 -> 60 -> 30 ->15 -> 00 (OFF) -> 120…
4. While unit is already in sleep mode, press the SLEEP button to display the amount of sleep time
remaining; press again to change sleep time to the next lower increment.
5. Use the Volume controls to set the preferred sound level for Sleep Mode.
Sleep Mode
1. Press the SNOOZE / DIMMER button when the alarm sounds.
2. The alarm will be silenced and come on again 7 minutes later.
3. Snooze can be pressed several times during the 1 hour alarm period.
Snooze Function
1. Press the TREBLE / BASS button on unit or remote control to enter to EQ set mode.
• EQ access:
i. Treble -> -5 -> -4 -> -3 -> -2 -> -1 -> 0 -> +1 -> +2 -> +3 -> +4 -> +5
ii. Bass -> -5 -> -4 -> -3 -> -2 -> -1 -> 0 -> +1 -> +2 -> +3 -> +4 -> +5
2. As Treble and Bass adjusts with rotary search switch on the unit or volume button on the remote,
Bar display should move along.
3. Treble -> Bass -> exit EQ set
Setting the Treble / Bass
1. In FM, iPod, AUX mode, press the MUTE button on remote control to activate the mute function.
2. “MUTE” is displayed on LCD.
3. Press the MUTE button again to resume normal playback.
Mute Function
Note: Treble and Bass default setting is “0”.
OPERATIONAL INSTRUCTIONS
1. Press the SNOOZE / DIMMER button during normal operation to adjust the brightness of LCD display.
2. Dimmer grade: 0-11 levels with display bar.
3. Press and hold SNOOZE / DIMMER button for dimmer grade quick change.
Dimmer setting
The Alarm 1 and Alarm 2 functions can be set with the unit turned ON or OFF.
1. Press and hold ALARM 1 or ALARM 2 button on the top
panel of the unit for three (3) seconds. The alarm time will
flash on the upper left corner of the LCD display (for Alarm 1)
and the upper right corner (for Alarm 2). Rotate SEARCH
knob to set the hour and minute. Press ALARM 1 or
ALARM 2 button to confirm.
2. Wake up mode display will begin flashing, rotate SEARCH knob
to select from RADIO (FM), iPod L, iPod R or BUZZ (Buzzer).
Note: Pre–tune your desired radio channel in FM radio mode before
setting the wake up function.
• Wake to FM radio • Wake to iPod L • Wake to iPod R • Wake to Buzzer
* For Wake to Radio or Wake to iPod, set desired volume level when
in Radio or iPod mode. When alarm sounds, the volume will gradually
increase to the preset sound level.
3. When the wake up mode is selected, press ALARM 1 or
ALARM 2 button again to confirm until the Alarm indicator
appears on the display. If no button is pressed in 10 seconds,
changes are set and alarm set mode activates.
4. Press ALARM 1 or ALARM 2 to turn on or turn off the
alarm setting.
Setting the Alarm
Alarm 2 settings and display
iLuv | 12 iMM173 | V12M12_IM_EN_05082009 11 | iLuv
To adjust to Daylight Saving Time, slide the DST switch to “(+1)” to advance the time 1 hour. Slide
the DST switch to “(-1)” to turn the time back 1 hour.
For example: DST: 11:00pm (DST off) -> 12:00am (DST on). When the switch is at “(+1)” the “DST”
icon will display on LCD.
DST (Daylight Saving Time)