Intel DBPXA250 - Manual (Page 11)

DBPXA250 and DBPXA210 Development Platforms Specification Update 11
Summary of Changes
3 X 21 No Fix “PLL Voltage Too High”
4 X 22 No Fix “Remove Coin Cell Battery”
5 X 22 No Fix “Incorrect Boot Mode Selected For PXA210 Processor”
Table 1. Minimal Required ECOs for Intel® PXA250 and PXA210 Processor Cards and
Intel® BBPXA2xx Baseboards with B1 and B2 Silicon
Platform B1 Stepping B2 Stepping
BBPXA2xx Rev B 10 , 11 , 12 , 14 , 15 10 , 11 , 12 , 14 , 15
DCPXA250 D/C Rev C 3 , 6 , 7 , 8 , 9 , 10 , 13 3 , 6 , 7 , 8 , 9 , 10 , 13
DCPXA250 D/C Rev D 7 , 9 , 10 , 13 7 , 9 , 10 , 13
DCPXA250 D/C Rev E — —
DCPXA250 D/C Rev F — —
DCPXA210 D/C Rev A 1 , 2 , 3 , 4 , 5 1 , 2 , 3 , 4 , 5
NOTE: Intel recommends that customers should have the minimum platform revisions as listed below:
• B1 silicon or later
• Rev C DCPXA250 processor cards †
• Rev A DCPXA210 processor cards
• Rev B BBPXA2xx Development Baseboards
† Rev F DCPXA250 processor cards are recommended for systems using 100-MHz SDRAM
Summary of DCPXA210 Processor Card ECOs (Sheet 2 of 2)
ECO NO. Rev A Refer to: Status ECO Description