Inter-Tel 8526 - Manual (Page 79)

67 Inter-Tel ® Model 8524/8525/8526 User Guide
MO
VING O
N
Remote Feature Access
To access your endpoint from another endpoint:
1. Press and dial .
2. Enter your extension number.
3. Enter your password followed by . You can now use any of the following
features.
To change the station password using Remote Programming:
a. Press , , and dial .
b. Enter the new password, followed by .
c. Enter the new password again for verification, followed by .
To turn on Do-Not-Disturb:
a. Press , , and dial .
b. Enter message number (01-20) and, if desired, enter the optional second-line
message text.
c. Press .
To turn off Do-Not-Disturb:
Press , , and dial , then press .
To turn on Call Forward:
a. Press , , and enter one of the following Call Forward feature
codes.
b. Enter an extension number or enter a trunk access code followed by an out-
side telephone number.
c. Press .
To turn off Call Forward:
Press , , and dial , then press .
START 3 5 9
# >
FNC LINE 6
# >
# >
FNC LINE 6
END
FNC LINE 6 END
FNC # >
All Calls . . .. .. . . . .. . . .. . .355
If No Answer . . .. . . .. . . .. . .356 If Busy.. . . .. . . .. . . .. .. . . .. . . 357
If No Answer/Busy. .. . . .. . . 358
END
FNC LINE 2 END