IOGear GCS82B - Manual (Page 16)

Selecting the Active Port
(GCS82B only)
You can toggle between the two PCs by pressing and releasing the left or right control key twice [ctrl]+[ctrl]
(GCS84B only)
Each CPU port is assigned a numeric ID (1-4). You can directly access any computer connected to the KVM with a hot
key combination that specifies the ID of the CPU port.
• Press each of the following keys, in order, holding them down until all three are depressed. [Alt+Ctrl+Shift]
• Key in the appropriate port number (1,2,3,4)
• Press [ENTER] to complete your selection
Note: The combination must be on the same side of the keyboard (i.e. Left [ctrl]+left[Alt]+left[shift])
12
Operation