Pen stylus – Intermec NORAND 6642 User Manual

Page 16

Advertising
background image

SECTION 1

Overview

1-7

PEN*KEY

R

6642 Pen Computer User’s Guide

Pen Stylus

To remove the pen stylus, pull it straight out to the right.
To place the pen back in the pen holder, align the projection on

the pen with the groove in the pen holder and then gently

slide the pen into the holder. Make sure that you push the

pen all of the way in until it locks in place, so that it will not

fall out unexpectedly.

Figure 1Ć4

Pen Removal

"

NOTE:

Clean the tip of the pen stylus and wipe the screen with a soft lint–
free cloth before use. If you use the pen on the screen while either is
dirty, the display could become scratched or the pen might not move
smoothly on the display surface.

B

CAUTION:

Use only the pen provided or your finger tip. Do not use a wood
pencil, mechanical pencil, or any other sharp object. Doing so
will scratch the screen.

Advertising