Impex IVT-451 - Manual (Page 8)

STEP 2 (See Diagram 2)
A.) Attach the two Pivot Brackets (#12) to the Backrest Frame (#7) from each side.
B.) Lift the Backrest Frame and insert the two Pivot Brackets into the open slot on Rear
Support Frame (#2). Make sure the groves on the Pivot are attached on the slots
completely and the Pivots can swing smoothly.
C.) Cover the two open slots on the Rear Support Frame with Left & Right Swivel Cover
(#30 & #31).
DIAGRAM 2
7