ioSafe SoloPRO eSATA/USB 2.0 User Manual
Page 18
18
3.
Connect the included power supply to the SoloPRO.
CAUTION!
To avoid damage to the power supply connector, make sure
it is aligned correctly before plugging it into the drive. Do not move
the drive while it is powered up to avoid drive damage or data loss.
a)
Plug in the AC cord to the power supply.
b)
Plug the small end of the power supply into the SoloPRO’s power
port.
c)
Plug the AC cord into an AC outlet.
4.
Connect the eSATA cable from the PC to the SoloPRO.
NOTE:
Never connect the drive to the computer with more than one
cable.
a)
Identify the eSATA cable and connect it to the back of the drive.
b)
Connect the other end of the cable to your eSATA host adapter or
built-in eSATA connection.
5.
Turn on the power switch on the back of the SoloPRO and power-on
your computer.