iHome iH3 - Manual (Page 3)

iH3 IB v1.fh10 1/10/07 3:33 PM Page 3
1
quick start
DC 15V 1100mA
time zone
am
line out
Attach AC adaptor cable to
jack on back of the iH3 and
plug the other end into a
wall socket. Select the dock insert from
the chart below for your iPod®
model and place insert in dock.
Never dock an iPod without
an insert in place. Snap AM antenna into provided
stand, then plug antenna cable
into socket on back of iH3.
Move antenna 12” away.
•Press & hold the Time Zone
button on back until it flashes
•Turn the Set Wheel to select
your time zone
•Press the Time Zone
button again.
• Move the DST switch on back
of unit to +1 or -1 (adds or
subtracts an hour)
Insert iPod into dock (iPod® must
not be in a “skin” or case). Press
iPod Button on iH3. iPod will
charge while docked. Press the Radio button. Press
AM/FM button to select your
band. Turn the Set Wheel to
tune in a station.
DC 15V 1100mA
time zone
clock a
am ante nna
line out
nano Insert (fits all iPod nanos) 5G iPod (with video) 5G iPod (with video)
iPod with video 60GB
iPod with video 80GB 1st generation nano
iPod nano 1 GB
iPod nano 2 GB
iPod nano 4 GB
iPod with video 30GB
The iHome iH3 comes with inserts for
1st and 2nd generation iPod nanos, as
well as inserts for the iPod with video
(30GB, 60GB, 80GB). Inserts for other
iPods are available at
www.ihomeaudio.com
1:power 2:antenna 3:inserts
4:time 5:iPod 6:radio
2nd generation nano
iPod nano 2 GB
iPod nano 4 GB
iPod nano 8 GB