Intel Express 100BASE-T4 - Manual (Page 10)

7
Overview C H A P T E R 1
Rear panel
The rear panel of the Express Stackable Hub provides an AC power
receptacle, a redundant power connector (not supported), and two
cascade cable connectors.
Power receptacle
The AC power receptacle is provided for connecting to an AC power
outlet. The Express Stackable Hub accepts between 100 and 240V AC.
Cascade connectors
The Cascade Down and Cascade Up connectors and an Intel cascade
cable allow you to stack and link multiple Express Stackable Hubs to
increase the size of a particular workgroup in your network. The
cascade cable connects to the Cascade Down connector on the top hub
and the Cascade Up connector on the hub below it. NOTE
A stack of Express Stackable
Hubs can contain a maximum
of six hubs.
NOTE
If you include Intel Express
100BASE-TX and 100BASE-T4
Stackable Hubs in the same
stack, make sure you attach
only the appropriate devices
(TX or T4) to each type of
hub.