Intel 410 - Manual (Page 49)

Getting Started - RAID Array 410 for Windows NT – Intel
EK–SMRAC–IG. C01 4–5
Figure 4–4 Partition Pull-Down Menu
See Figure 4–5 Create Primary Partition Window
In the window, enter the size partition you want, then click on OK . (Depending upon
the partition size you choose, a message window may appear asking you to confirm
your selection.)
2. Continue to create new partitions until all disks have been partitioned.
3. Optional: Make disk logical names permanent.
The process of creating partitions assigns a logical name (the letter “C,” “D,” etc.) to
each partition. These letter assignments, under Windows NT, will normally “float.”
That is, they are subject to changing (after reboot), if the disk configuration changes.