IBM Partner Pavilion 6400 - Manual (Page 51)

twinax code dump mode
Multi–Platform Interface Feature Operation Guide 37
Code Dump Mode
The code dump mode allows you to print
all the data the controller receives from the
IBM system in a hexadecimal format.
Entering Code Dump mode
To access the Code Dump mode provided
by the controller:
1
Power off the printer.
2
Set the ADDRESS switch to address
7.
3
Power on the printer. After the MPI
configuration has printed, set the
ADDRESS switch on the interface I/O
to the device’s current address (0-6)
on the host system.
note
In order to use the "Code Dump Mode", the
MPI must be receiving data from the host
computer.