Iluv i202 - Manual (Page 10)

Ear Clip Headset w/ Bluetooth wireless technology V10M10_IM_EN_11082006
www.i-Luv.com - 9 -
OPERATING INSTRUCTIONS
Pairing i202 with your Mobile Phone or Audio Device
Before using this headset, make sure that it is paired with a mobile phone and audio
devices with Bluetooth wireless technology. To pair with such a device, follow the
instructions below:
1. Please make sure the headset is turned off.
To Turn i202 if it is currently turned on then
press the Multi-Function button for
approximately five (5) seconds. There will be
a high-pitched beep with red light flashes
about 4 times and headset will be off.
2. Press and hold the Multi-function button
for approximately five (5) seconds until the
red and blue lights blink alternately
around the button. The headset is now
ready for pairing. (Note: Pressing the
Multi-function button longer than five (5)
seconds will turn off the headset. If this
fails, then turn off the headset and turn it
on again by holding the Multi-Function button for five (5) seconds for pairing mode)
3. Set your mobile phone or audio
device to its pairing mode
(phones and audio devices with
Bluetooth wireless technology will
have their own pairing
instructions. See owner’s manual
of the phone or device for these
instructions).
4. Place the mobile phone or audio device and the i202 close
together during pairing. The mobile phone and most audio
devices will detect i202 and identify it, displaying the model
number i202.
5. Once the i202 has been identified, confirm as per the
instructions on the device. You will be required to enter a
password on the next screen.