Iluv i202 - Manual (Page 8)

Ear Clip Headset w/ Bluetooth wireless technology V10M10_IM_EN_11082006
www.i-Luv.com - 7 -
GETTING STARTED
Charging the Headset and Audio Adapter
Before the first use of this headset, it is recommended to fully charge the headset and the
included audio adapter (dongle). To do so, follow the instructions below:
1. Open the mini USB port dust cover (on the
bottom of the right ear clip, or top right on the
dongle) before attaching USB cable.
2. Attach other end of cable to supplied USB
power adapter.
3. Plug the supplied USB power adapter to an AC outlet.
4. Plug the other end to the USB connector on the headset or
dongle. The red light will be on when connected. When
the headset/dongle is fully charged, the red light will go off.
5. Unplug the USB adapter when the headset/dongle is fully charged.
Using your Computer’s USB port to Charge
If your computer has a USB port, you can also charge the headset or dongle using your
computers USB port.
1. Follow the directions above for connecting the USB cable to the headset or dongle.
2. Connect the USB cable into the USB plug on a computer.
3. Unplug when fully charged.
Notes on Charging
• Use only the included power adapter to charge the headset.
• The built-in rechargeable battery should be charged at least once every two months.
• Headset cannot be used while charging.
Important: If your unit displays red flash and you hear long beep sound while operating,
this indicates low battery condition, so please charge the unit before operating again.