Icom IC-7200 - Manual (Page 10)

10
Windows 2000 (Continued)
DRIVER INSTALLATION
o Select “slabbus.inf” in the “Win” folder, then click
[Open].
• The folder construction: “7200UsbDrv_v100” ➞
“Driver” ➞ “Win”
Select
“slabbus.inf”
Click
!0 Click [OK].
Click
!1 When the driver is found, the following dialogue is
displayed.
Click [Next>] to start the installation.
Click
!2 After the installation is completed, click [Finish].
Click
!3 The “Found New Hardware Wizard” appears again.
Click [Next>].
Click
!4 Select “Search for a suitable driver for my device
(recommended),” then click [Next>].
Click
Select
!5 Select “Specify a location,” then click [Next>].
Click
Select
☞ Continues to the next page