Icom IC-7200 - Manual (Page 2)


PROCEDURE
Refer to the following steps for the USB driver installation.
Before installing the USB driver, log in as the administrator and quit all applications when Windows is run-
ning.
Overview
• System requirements (p. 1)
• Item requirements (p. 1)
Preparing • Before installing the USB driver (p. 3)
Driver installation
• Windows Vista (p. 4)
• Windows XP (p. 6)
• Windows 000 (p. 9)
COM Port Confirmation
• Windows Vista (p. 1)
• Windows XP/Windows 000 (p. 1)
Driver uninstallation
• Windows Vista (p. 13)
• Windows XP/Windows 000 (p. 13)
For your reference
• COM Port setting (p. 14)
• About audio (p. 16)
• Specifications (p. 19)
Precautions
• Before connecting to the PC (p. )
• Important (p. )
• For IC-PCR1500/IC-PCR500 user (p. )
Before connecting to the PC
The process of connecting the USB cable (third party)
between the transceiver and a PC may differ accord-
ing to your OS.
See the “Driver installation” on pgs. 4 to 11 for details.
• After the driver installation is completed, the USB
cable can be connected regardless of the OS.
• The USB driver installation is required for each unit,
because of the COM port number difference.
Important
• Audio from the USB port may cut out or audio con-
trol with the PC software may get late because of
the PC performance (including OS, environment,
etc.)
• Audio from the USB port may cut out when the CPU
load increases.
• The audio device settings of OS may be changed
when the transceiver is connected to the PC.
• Icom is not responsible for proper operation when
connecting the transceiver and the PC through an
USB hub.
For IC-PCR1500/IC-PCR2500 user
• USB driver on the supplied CD
The file that is included on the supplied CD with
the IC-PCR1500/IC-PCR500 is the same as the
download file from Icom HP. So, the USB driver in-
stallation can also be performed with the supplied
CD.
• USB driver uninstallation
If the USB driver uninstallation is performed, the
connected unit (when the USB driver is installed) or
IC-PCR1500/IC-PCR500 cannot be used.
• USB driver re-installation
The USB driver installation is required for each
unit, because of the COM port number difference.
See the IC-PCR1500/IC-PCR500 instruction man-
ual when installing the USB driver with the supplied
CD.
PRECAUTIONS