iLive ISP389B - Manual (Page 6)

6
oPerations
setting the CloCk █
Press and hold the 1. Power Button to turn
the unit off.
When the unit is powered off, a small red
light will appear as an indicator, directly
to the right of the display.
Press and hold the
2. Clock adjust Button
for 3 seconds.
The hour will begin to blink on the
display.
Press the
3. Volume/hour Button to set the
hour
Press the
4. Clock adjust Button.
The minute will begin to blink on the
display.
Press the
5. Volume/minute Button to set
the minute.
Press the
6. Clock adjust Button to set the
adjusted time.
using the auxiliary inPut █
Use a 1. 3.5mm Mini Phono Cable, not
included, to connect an MP3 player or
other audio source to the auxiliary 1 or
auxiliary 2 input.
Press the
2. Power Button to turn the unit
on.
Press the
3. source Button to switch to
Auxiliary 1 or Auxiliary 2 Mode, as
indicated by the display.
Use the connected MP3 player or audio
source’s native controls to control audio
playback.
using the Video outPut █
Use an 1. RCA Composite Video Cable,
not included, to connect a television or
display to the Video output.
This will allow you to play video from an
iPod or iPhone docked on the unit, on a
connected television.
Dock an iPod/iPhone onto the unit.
2.
Press the 3. Power Button to turn the unit
on.
Press the
4. source Button to switch to
iPod Mode.
The iPod or iPhone “Video Settings”
need to be set to “Video Out” or “TV
Out”.
Select a video on the docked iPod or
5.
iPhone, and press the Play/Pause Button
to begin playing it through the connected
television.
ISP389B.indd 6 3/24/2009 12:27:52 PM