IBM Aptiva 2142 - Manual (Page 175)

Asm– Part
Index Number Units Description
2–1 Machine Type 2140
Note See the Appendix B,
“Model/Monitor Configurations and
FRU Part Numbers” on page B-1 for
model specifications.
–1 R Chassis Assembly
–NS 76H6353 1 Amplifier Signal to System Board
Cable
–NS 76H6355 1 Amplifier Audio to System Board
Cable
–NS 75H8905 1 Diskette Drive Cable
–NS 76H6351 1 Power Switch to System Board Cable
–NS 12J5980 1 Serial Cable
–NS 76H6367 1 Amplifier Tier 1
–NS 12J5979 1 Serial Interface Module-Home Director
–2 12J6487 1 Fan Assembly
All system board FRUs are shipped
without processor or DIMMs. When
replacing a system board, remove all
FRUs from the original system board
and install them on the new system
board.
Attention - The amplifier card BIOS in
the system board must match the
amplifier card installed in the
computer. See “Amplifier Card BIOS”
on page 1-16.
–3 93H5148 1 System Board - Type A-1
–3 93H5225 1 System Board - Type A-2
–3 93H7524 1 System Board - Type A-2 with TV
OUT 'J13'
–NS 93F0063 1 Lithium Battery
–NS 33F8354 1 Lithium Battery (EMEA)
–NS 93F0067 1 Jumper Kit
–NS 12J6296 1 Screw Kit
–4 01K1104 1 DIMM, 16 MB SDRAM
–4 01K1105 1 DIMM, 32 MB SDRAM
–5 42H4865 1 Pentium MMX-166 MHz Processor
Parts Catalog 7-5