English, 2 advanced bios features, Hard disk boot priority – Intel GA-8I945P PRO User Manual
Page 34: First / second / third boot device, Password check
GA-8I945P (Pro)(-G) Motherboard
- 34 -
English
2-2
Advanced BIOS Features
Hard Disk Boot Priority
Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc.
Use < > or < > to select a device, then press<+> to move it up, or <-> to move it down the list. Press
<ESC> to exit this menu.
First / Second / Third Boot Device
Floppy
Select your boot device priority by Floppy.
LS120
Select your boot device priority by LS120.
Hard Disk
Select your boot device priority by Hard Disk.
CDROM
Select your boot device priority by CDROM.
ZIP
Select your boot device priority by ZIP.
USB-FDD
Select your boot device priority by USB-FDD.
USB-ZIP
Select your boot device priority by USB-ZIP.
USB-CDROM
Select your boot device priority by USB-CDROM.
USB-HDD
Select your boot device priority by USB-HDD.
LAN
Select your boot device priority by LAN.
Disabled
Select your boot device priority by Disabled.
Password Check
Setup
The system will boot but will not access to Setup page if the correct
password is not entered at the prompt. (Default value)
System
The system will not boot and will not access to Setup page if the correct
password is not entered at the prompt.
If you want to cancel the setting of password, please just press ENTER to make [SETUP] empty.
" # " System will detect automatically and show up when you install the Intel
®
Pentium
®
4
processor with HT Technology.
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Advanced BIOS Features
` Hard Disk Boot Priority
[Press Enter]
First Boot Device
[Floppy]
Second Boot Device
[Hard Disk]
Third Boot Device
[CDROM]
Password Check
[Setup]
# CPU Hyper-Threading
[Enabled]
Limit CPUID Max. to 3
[Disabled]
No-Execute Memory Protect
(Note)
[Enabled]
CPU Enhanced Halt (C1E)
(Note)
[Enabled]
CPU Thermal Monitor 2(TM2)
(Note)
[Enabled]
CPU EIST Function
(Note)
[Enabled]
KLJI: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F3: Language1
F5: Previous Values F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level`
Select Hard Disk Boot
Device Priority
(Note) This item will show up when you install a processor which supports this function.
Only for GA-8I945P Pro.