Data editing command list, Examples – ID Tech 70 User Manual
Page 24
Data Editing Command List
Enter Setup Mode
/E/D/FJ<ENTER> Clear JX<ENTER>
Review Configuration
JY<ENTER>
Exit Data Editing
JZ<ENTER>
Delete Line
JS<ENTER>
Data Editing
JA<ENTER>
Enabled
1<ENTER>
Disabled
0<ENTER>
Unmatched Input
JB<ENTER>
Do Not Send
0<ENTER>
Send
1<ENTER>
Code IDs
JC<ENTER>
Enter JC<ENTER> and the default Code ID(s) from Code ID Definition
on page 29.
Set Length
JD<ENTER>
Enter JD<ENTER>and two digits from the keyboard to indicate length.
Match String
JE<ENTER>
Enter JE<ENTER>, one digit <ENTER> one digit <ENTER> for the start
position, and the string to match each character, followed by a <EN-
TER> (maximum 60 characters).
Count
JF<ENTER>
Type JF<ENTER> and enter two digits from the keyboard to indicate
the next end of field, each followed by a <ENTER>.
Search String
JG<ENTER>
Enter JG<ENTER> and enter characters for the search criteria from the
keyboard or function character chart, each character follo wed by a
<ENTER>.
Add Field
JJ<ENTER>
Enter JJ<ENTER> and sequentially the characters to be included in the
new field from the keyboard or function character chart, each followed
by a <ENTER>.
4 2
4 3
Send Field Sequence
JK<ENTER>
Enter JK<ENTER> and the field ID characters, each followed by
<ENTER> in the order to be sent (use upper case alphabetic charac-
ters).
Add Delay
JM<ENTER>
Enter JM<ENTER> and two digits, each followed by a <ENTER> from
the keyboard. Each unit equals 100 milliseconds. Examples
Examples
EXAMPLE ONE
76440057320712
Symbology
Code 128
Desired Output: Divide the input data record into two fields with one
consisting of the first six digits and the second containing the remain-
ing data. The output should have a <ENTER> inserted after each field.
Formula
ID h C 06 A <ENTER> SEND ACBC
Field List
Field A 764400
Field B 57320712
Field C <ENTER>
Keystroke Sequence
Enter Data Editing Setup
/E/D/FJ
Enter Data Editing and Enable
JA 1
Enter Track_ID and h (for Code 128)
JC h
Enter Count and 06
JF 0<ENTER> 6<ENTER>
Enter Add Field and <ENTER> character
JJ ^N<CR>
Enter Field Sequence and ACBC JKA<ENTER>C<
ENTER>B<CR>C<CR>
Enter Exit Setup
JZ
Output Data
764400<ENTER>
57320712<ENTER>