Invacare 9000 SL - Manual (Page 49)

Part No. 1056953 49 9000 Series
INSTALLING WHEEL LOCK SHOE EXTENSIONS
(FIGURE 5)
1. Loosen the two (2) set screws on the wheel lock shoe extension until the set
screws do not protrude into the slot.
2. Insert the disk wheel lock shoe into the slot in the shoe extension.
NOTE: Ensure the pointed end of the
wheel lock shoe extension is facing toward
the rear wheel.
3. Position the wheel lock shoe extension
so the outside edge is flush with the
out side edge of the wheel lock shoe.
4. Securely tighten the two (2) set screws
to secure the wheel lock shoe exten-
sion to the wheel lock shoes.
Slot
Set
Screws
Pointed End of
Wheel Lock Shoe
Extension
Wheel Lock Shoe Extension
FIGURE 5 - INSTALLING WHEEL
LOCK SHOE EXTENSION
SECTION 8 ANTI-TIPPERS/WHEEL LOCKS
ANTI-TIPPERS/WHEEL
LOCKS