InSinkErator GN1100 User Manual

Page 5

Advertising
background image

Parts & Components

In general, you'll be installing a faucet above-sink, with a filter assembly and a heating
unit below-sink. You'll also be connecting all of the plumbing. Under the sink you'll
need a grounded electrical service outlet, a connection to the cold water line (not
included), and enough space to install the filter and tank assemblies.

1. Dispenser Faucet (HC Model shown)
2. DuraTank

™

Hot Water Tank

3. Filter Head & Bracket Assembly
4. F-201 Filter Cartridge
5. Two 3/8" x 3' Polyethylene Tubes
6. 3/8" Brass Nut, Ferrule, and Tube Insert
7. 6" Filter Vent Tube (not shown)

8. 3/8" to 1/4" Quick-Connect Union Fitting

(for GN1100 models)
or 3/8" to 1/4" Quick-Connect "Y" Fitting
(for HC1100 Models)

9. Dispenser Faucet Mount O-Ring, Clamp

Plate, 6 mm Nut and Installation Tool

10. Tank Mounting Bracket and Screws

Here's what a typical complete installation should look like when you're done:

Note: Component placement should be such to avoid electrical outlet.

5

SinkTop™ Switch
sold separately.

For Reference Only

10.

4.

3.

5.

1.

2.

9.

6.

8.

Advertising
This manual is related to the following products: