Section 11—options, Installing anti-tippers – Invacare Wheelchair Atlas User Manual
Page 31
Advertising
SECTION 11—OPTIONS
31
SECTION 11—OPTIONS
ƽ WARNING
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely. Otherwise injury or damage may occur.
Installing Anti-Tippers
NOTE: For this procedure, refer to FIGURE 11.1.
1. Remove the rubber tip from the lower frame tube.
2. Slide the anti‐tipper onto the lower frame tube until the anti‐clamp wraps around the
lower frame tube.
3. Tighten the anti‐tipper clamp by turning the locknut counter‐clockwise.
4. Repeat STEPS 1 to 3 for the other anti‐tipper.
FIGURE 11.1 Installing Anti-Tippers
Locknut
Anti-Tipper
Clamp
Lower
Frame
Tube
Advertising