Intel GA-8I945GZME-RH - Manual (Page 67)

Appendix - 67 -
English
STEP 3:
Connect the 4-channel speakers to the audio jacks
on the motherboard and the surround cable, a small
window will pop up and ask you what type of
equipment is connected. Choose a device depend-
ing on the type of speaker connected (4-channel
audio consists of Front Speaker Out (Line Out) and
Rear Speaker Out) and then click OK. The 4-
channel audio setup is completed.
Setting Up 4-Channel Audio
STEP 1 :
After installation of the audio driver, you should find
an Audio Manager icon in your system tray (you
can also find the icon in Control Panel). Double-
click the icon to open the Audio Control Panel.
STEP 2:
In the Audio Control Panel, click the Audio I/O tab.
In the upper left list, click 4CH Speaker.