Insignia NS-LTDVD26-09 - Manual (Page 25)

25
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo
www.insignia-products.com
PC input signal chart
The following chart shows the suggested screen
resolutions.
If "Unsupported" appears on the screen, adjust
the PC display setting to correspond to one of
the settings in the above table.
Changing your computer's video
resolution
The following example shows Windows XP
settings. Even if you use a different Windows
operating system, the basic setup methods are
similar. For changing video resolution on a
Macintosh computer, refer to your Macintosh
documentation.
To change your computer's video resolution:
1 Click Start, Control Panel, then double-click
Display. The Display Properties dialog box
opens.
2 Click the Settings tab.
3 Change the screen resolution setting to a
supported resolution (the ideal resolution for
your TV is 1360×768).
4 Click OK, then click Yes to save your
changes.
Using the DVD player
Playing a DVD
To play a DVD:
1 Press POWER to turn on your TV.
2 Press INPUT, press / to select DVD,
then press ENTER. You can also press DVD
on the remote control to select the DVD
mode. The DVD startup screen appears on
the screen.
3 Insert a DVD into the disc slot, with the label
facing forward. The DVD player reads the
DVD and displays the opening menu.
4 Press / and / to highlight a menu
item, then press ENTER.
5 During playback:
• Press (Play/Pause) to pause
playback. Press it again to resume
playback.
• Press to fast-reverse, and press
to fast-forward.
• Press to skip to the previous
chapter, or press to skip to the next
chapter.
• To play in slow motion (forward or
reverse).
• To completely stop DVD playback, press
STOP twice.
6 Press to remove the DVD.
Playing an audio CD
To play an audio CD:
1 Press POWER to turn on your TV.
2 Press INPUT, press / to select DVD,
then press ENTER. You can also press DVD
on the remote control to select the DVD
mode. The DVD startup screen appears on
the screen.
3 Insert a CD into the disc slot, with the label
facing forward.
4 Press (Play/Pause). The tracks play in
numerical order.
5 Press STOP to stop playback, or press
(Play/Pause) to pause playback.
6 Press to remove the CD.
To select a specific track for playback:
•
After you insert a CD and your TV finishes
reading the disc, press the number buttons to
enter the track number you want to play, then
press ENTER.
Using DVD repeat play
You can repeat chapters, titles, or the entire
DVD.
To use repeat play:
1 While the DVD is playing, press REPEAT to
select what you want to repeat. You can
select:
• CHAPTER (repeats the current chapter)
• TITLE (repeats the current title)
• ALL (repeats the entire DVD)
2 To stop repeat playback, do one of the
following:
Format Resolution Freq. (Hz)
VGA 640 Ч 480
720 Ч 400 60
70
SVGA 800 Ч 600
800 Ч 600 60
72
XGA 1024 × 768 60
WXGA 1280 Ч 768
1360 Ч 768 60
60
Note
Playback starts automatically if a DVD is already
loaded
Note
Playback starts automatically if a CD is already
loaded