Insignia NS-LTDVD26-09 - Manual (Page 30)

30
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo
www.insignia-products.com
3 Press / to highlight DOLBY DIGITAL
SETUP, then press ENTER. The Dolby
Digital Setup Page opens.
4 Press / to highlight DUAL MONO or
D.R.C, then press ENTER.
5 Press / to highlight STEREO, LEFT
MONO, RIGHT MONO, or MIXED MONO,
then press
ENTER.
• DUAL MONO-This is the output mode for
the left and right signals of the selected
audio output. If it is set to MIXED MONO,
the function only works when the DVD
uses 5.1-channel sound.
• D.R.C-Select to adjust the linear
compression rate to obtain different
compression results for the signals.
6 Press / to change the setting, then press
ENTER.
7 Press one or more times to go back to the
previous menu.
8 To close the menu, press to highlight the
Exit icon, then press ENTER.
Using the DVD equalizer
You can select preset graphic equalizer patterns
according to the genre of the music being
played. You can also adjust the equalizer
settings.
To use the equalizer:
1 While your TV is in DVD mode, press SETUP.
The Setup Menu opens.
2 Press / to select the Audio icon ,
then press ENTER. The Audio Setup Page
opens.
3 Press / to highlight CHANNEL
EQUALIZER, then press ENTER. The
Channel Equalizer Page opens.
4 Press / to highlight EQ TYPE, then
press ENTER.
5 Press / to select one of the following
preset equalizer patterns, then press
ENTER:
• NONE
• ROCK
• POP
• LIVE
• DANCE
• TECHNO
• CLASSIC
• SOFT
6 Press one or more times to go back to the
previous menu.
7 To close the menu, press to highlight the
Exit icon, then press ENTER.
Setting up DVD 3D sound
To set up 3D sound:
1 While your TV is in DVD mode, press SETUP.
The Setup Menu opens.