Intel FSB800 (PC3200) - Manual (Page 22)

Installation
Page 3-4
Figure 3
Step 4
Apply thermal compound to the top of
the CPU and install the heatsink as
shown.
Step 5
Install the cooling fan assembly. Press
the two clips in the direction of the
arrows shown in Figure 5 to secure the
assembly to the CPU socket.
Step 6
Plug the CPU fan into the CPU fan
connector.
The installation is complete.
Figure 4
Figure 5 Figure 6
NOTES:
• Damage to Intel Pentium TM 4 processors might result if installed with
incorrect CPU fan and heatsink assemblies. Use Intel’s design thermal
solution shown in the illustrations above: an active heatsink; an extruded
aluminum heatsink base; and a fan attached to the top on the fin array.
• Apply heatsink thermal compound or paste to the CPU to avoid CPU
overheating and damage.
• In accordance with Intel Corp. specifications, do not install a CPU over
50 times to avoid bending the pins and damaging the CPU.
Step 3
Close the socket by lowering and
locking the actuation lever.