IBM Partner Pavilion 9013RF - Manual (Page 11)

7
4 Software Installation
After finishing the hardware installation as described in this manual and starting
up your PC, you should be able to immediately take advantage of the wireless
function of the wireless keyboard and mouse. If the keyboard and mouse are
not working properly, see Chapter 6 Troubleshooting for tips on how to solve
your problem.
4.1 Keyboard Driver Installation
If your operating system is Windows ME, Windows 2000 or
Windows XP, you can immediately take advantage of the extra
function buttons on the keyboard (except ‘Battery Low’ and ‘LED Light’
functions). But, if your operating system is Windows NT 4.0, Windows 95
or Windows 98, you will have to install the keyboard driver software to
take advantage of these functions. The keyboard driver program is
located on the driver CD included in the box.
1. Insert the driver CD into your computers CD-ROM drive.
2. Run the SetupKey.exe in the \9013RF\keyboard software directory
of the driver CD.
3. Follow the onscreen instructions to finish the installation procedure.
4. For detailed information on how to install the driver, please refer to
the Readme.htm file in the \9013RF\Keyboard Software\Readme
folder.
4.2 Mouse Driver Installation
In order to take advantage of the special shortcut button functionality
of the mouse you will have to install the mouse driver which is
located on the driver CD included in the box.
1. Make sure the driver CD is in your computers CD-ROM drive.
2. Run the setup.exe in the \9013RF\mouse software directory of the
driver CD.
3. Follow the on screen instructions to finish the installation procedure.
4. For detailed information, please refer to the readme.htm file in the
\9013RF\Mouse Software\Readme folder.