Intel D845WN - Manual (Page 57)

Using the Setup Program
57
Primary/Secondary IDE Master/Slave Submenus
Maintenance Main Advanced Security Power Boot Exit
Boot Configuration
Peripheral Configuration
IDE Configuration ➜
Primary IDE Master
Diskette Configuration Primary IDE Slave
Event Log Configuration Secondary IDE Master
Video Configuration
Secondary IDE Slave
There are four IDE submenus: Primary master, primary slave, secondary master, and secondary
slave. Table 16 shows the format of these IDE submenus. For brevity, only one example
is shown.
Table 16. Primary/Secondary IDE Master/Slave Submenus
Feature Options Description
Drive Installed None Displays the type of drive installed.
Type
•
None
•
User
•
Auto (default)
•
CD-ROM
•
ATAPI Removable
•
Other ATAPI
•
IDE Removable
Specifies the IDE configuration mode for IDE devices.
User allows capabilities to be changed.
Auto fills-in capabilities from ATA/ATAPI device.
Maximum Capacity None Displays the capacity of the drive.
LBA Mode Control
•
Disabled
•
Enabled (default)
Enables or disables LBA mode control.
Multi-Sector Transfers
•
Disabled
•
2 Sectors
•
4 Sectors
•
8 Sectors
•
16 Sectors (default)
Specifies number of sectors per block for transfers from
the hard disk drive to memory.
Check the hard disk drive’s specifications for optimum
setting.
PIO Mode
(Note)
•
Auto (default)
•
0
•
1
•
2
•
3
•
4
Specifies the PIO mode.
Note: These configuration options appear only if an IDE device is installed.
continued