Intel SE7320 - Manual (Page 28)

User’s Guide for Server Configuration Wizard (SCW) Utility
10 Loading a Configuration from a Diskette
If a previous SCW configuration has been saved to removable media, that file may be used on
identical machines to run SCW in unattended mode. The GUI displays the standard Windows
interface to help locate the file. Settings from this file will be written to the server and a reboot
should occur.
11 Creating Diskettes
SCW provides the option to place the OS level Device Drivers on removable media. Choose drivers
by OS or drivers per device. Multiple selections may be made at one time on the drivers or OS
screens and available choices vary by platform.
Figure 26. Disk Set Selection
• Continue will switch to DOS to place the drivers onto the media.
• If multiple disks are needed, SCW will prompt for them.
• Any removable media may be used that is formatted for FAT16 and is seen by the utility. (See
also Appendix B).
28