Intel SE7320 - Manual (Page 13)

Channel Configuration (LANs and Serial/Modem)
The number of channels available depends on the platform. Not all channels must be configured.
Figure 9. Channels to Configure
Feature Description
Channel 1 d NIC1. On servers
is not configu
through the OS. On S
The onboar
NIC with dual ports onboard, the second
red by SCW. This NIC can be used either OOB or
E7520VP2, NIC2 is used.
Channel 4 For a modem attached to the Serial port.
Channel 3 able only for the Adva Telnet,
P, SNM
GCM (Advanced Module) NIC.
Avail
Web, SMT nced Module GCM NIC providing
P and ARSC support. Available only through the
13