Icom VHF MARINE TRANSCEIVER IC-M501EURO - Manual (Page 19)

6
SET MODE
15
■ Set mode items
◊ Beep tone
You can select silent operation by turning beep tones OFF or
you can have confirmation beeps sound at the push of a
switch by turning beep tones ON.
◊ Scan mode
The transceiver has 2 scan modes: normal scan and priority
scan. Normal scan searches all tag channels in the selected
channel group. Priority scan searches all tag channels in se-
quence while monitoring channel 16.
◊ Scan resume timer
The scan resume timer can be selected as a pause (OFF) or
timer scan (ON). When OFF is selected, the scan pauses
until the signal disappears. When ON is selected, the scan
pauses 5 sec. and resumes even if a signal is being received
on channels except for channel 16.
◊ Dual/tri watch
This item sets the [DUAL] switch function as dual watch or tri-
watch.
See the section ‘Dual watch/Tri-watch’ for details.
Set mode
DUAL/TRI
Dual watch (default) Tri-watch
Set mode
Scan timer
Scan timer ON (default) Scan timer OFF
Set mode
Scan mode
Priority scan (default) Normal scan
Set mode
Beep
Beep tone ON (default) Beep tone OFF
0 IC-M501EURO_3.qxd 03.7.29 15:26 Page 15