Icom VHF MARINE TRANSCEIVER IC-M501EURO - Manual (Page 7)

t CHANNEL SELECTOR [CHANNEL]
Rotate [CHANNEL] to select the operating channels, set
mode contents, etc. (p. 8)
y DIMMER SWITCH [DIMMER]
Push to select one of 8 backlighting (LCD and switches)
levels.
u CALL CHANNEL SWITCH [CALL]
➥Push to select the call channel. (p. 6)
➥Push for 3 sec. to enter call channel programming con-
dition. (p. 9)
➥While pushing [HI/LO], enters memory name program-
ming condition. (p. 9)
i CHANNEL 16 SWITCH [16]
➥Selects channel 16 when pushed. (p. 6)
➥Enters initial set mode when pushed while turning power
ON. (p. 14)
o DIAL SWITCH [DIAL]
➥Exits from channel 16 or call channel when pushed. (p.
6)
➥While pushing [HI/LO], selects channel group when
pushed. (pgs. 6, 7)
• The European version has International channels only and
this function is not available.
!0 SCAN SWITCH [SCAN/TAG] (p. 13)
➥Starts and stops normal or priority scan when tag chan-
nels are programmed.
➥Push [SCAN/TAG] for 1 sec. to set the displayed chan-
nel as a tag (scanned) channel.
➥While pushing [HI/LO], push for 3 sec. to clear all tag
channels.
!1 DUALWATCH/TRI-WATCH SWITCH [DUAL] (p. 11)
➥Starts dualwatch or tri-watch when pushed.
➥Stops dualwatch/tri-watch when either is activated.
PANEL DESCRIPTION
3
2
0 IC-M501EURO_3.qxd 03.7.29 15:26 Page 3