Infinite Peripherals DPP-350 - Manual (Page 27)

Replacing Battery
To replace the battery in the DPP-350 thermal printer follow the
steps below.
Steps:
1. Turn over the DPP-350 and place on a flat
surface. Rotate the (2) locking levers as
shown in the figure on the right.
Figure 15
2. Lift the battery cover as showed in the
figure on the right.
Figure 16
3. Lift the battery as shown in the figure on
the right.
Figure 17
4. Detach the battery connector as shown in
the figure on the right. Reverse Steps 1-4
to install the new battery pack.
Figure 18
. . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc.
www.ipcprint.com Page 27
DPP-350 User Manual v1.09