Connecting to a tv, Connecting, Using the supplied audio/video connection cable – Integra DPS-8.3 User Manual

Page 15: Before connecting

Advertising
background image

15

MODEL NO.

DPS-

8.3

SACD & DVD AUDIO/VIDEO PLAYER

REMOTE

CONTROL

COMPONENT

2

IR

DIGITAL

OUTPUT

OPTICAL

COAXIAL

OUT

IN

S VIDEO

VIDEO

Y

P

B

P

R

COMPONENT

1

VIDEO
OUTPUT

ANALOG
OUTPUT

L

R

L

R

SURR

1 1+2

CH 1

CH 2

FRONT

SURR 1

CENTER

SURR 2

SUB

WOOFER

TRIG-

GER

OUT

RS-232

AC INLET

12

V

Y

P

B

P

R

Connecting to a TV

Before connecting

• Refer also to the instruction manual of the TV.
• When you connect the DVD Player to the TV, be sure to turn off the

power and unplug both units from the mains before making any
connections.

• Connect the DVD Player to the TV directly. If you connect the DVD

Player to a VCR, TV/VCR combination, or video selector, the playback
picture may be distorted as DVD videos are copy protected.

• Connect the plugs securely.

Incomplete

Insert completely

: Signal flow

Be sure to set the TV Aspect after connection using
the Setup Navigator explained in “Setting Up the
Player” starting on page 21 or the function setting
menu explained in “Adjusting Audio and Video
Settings” starting on page 46.

Stereo audio/video connection cable
To audio and video input

L (White)

R (Red)

Using the supplied audio/video connection
cable

Using the supplied audio/video cable, make audio
connections from the ANALOG OUTPUT CH 1 or
CH 2 L and R jacks to the corresponding audio input jacks
on the TV. In the same manner, make video connection
from the VIDEO OUTPUT VIDEO jack to the corresponding
video input jack on the TV.
By making connections to a stereo system, you can
improve the quality of the sound. Using an audio cable
(not supplied), make audio connections from the ANALOG
OUTPUT CH 1 or CH 2 L and R jacks to the corresponding
jacks on the stereo component.

Note

Be sure to match the colors of the plugs on the cable with the
corresponding jacks on the DVD Player and the TV: yellow for
video, red for R (right) audio and white for L (left) audio.
If the TV audio is monaural, leave the red plug disconnected.

Video
(Yellow)

DO NOT connect
the mains lead at
this time.

Notes

• Connect the player’s video output directly to the television.
• Since the player is compatible to analog copy protection there

may be cases when recordings from the deck may be distorted
during playback.

• Progressive signals are not output from the players video or

S1/S2 video output jack.

Connecting

Advertising