Intel I815E User Manual
Page 22
INSTALLATIONS
18
I815E User’s Manual
FAN2, FAN3: System Fan Power Connectors
FAN2 and FAN3 are 3-pin headers for the system fans. The fans must
support 12V.
Pin #
Signal Name
1
Ground
2
+12V
3 2 1
3
Rotation detection
J1, J3: Line-out and Microphone connectors
J1 ad J3 are connectors for Line out and Microphone jacks.
J4, J5: CD In Connectors
J4 and J5 are the CD-in connectors. Below is their pin out assignments.
1 2 3 4
4 3 2 1
J4
J5
Signal Name Pin #
Pin # Signal Name
Ground
1
1
Right
Left
2
2
Ground
Ground
3
3
Ground
Right
4
4
Left
J6: Secondary RJ45 Connector (optional)
J6 is the secondary RJ-45 Ethernet connector, supporting the optional
82559 Ethernet controller, located between the Microphone connector
and VGA CRT connector. Refer to the section below for its pin
assignments.