IOGear GUWAVKIT User Manual
Page 10
10
11
1. VGA : VGA Activity Indicator
LED is solid when display cable is connected
-
LED is blinking when data is being transferred
-
2. PWR: Power Indicator
LED is solid when power is applied
-
3. Status Indicator
Single* solid light: device is wirelessly connected to
-
the selected Wireless USB Transmitter
Single* slowly blinking light: device is searching for a
-
Wireless USB Transmitter
Single* quickly blinking light: device is trying to
-
connect to a Wireless USB Transmitter
Rapidly scrolling lights: device is used in wired mode.
-
Three Simultaneous Blinking Lights: Cable
-
Association Mode
*Only one light at a time. The position of the light indicates
which Wireless USB Transmitter the device is trying to
communicate with.
4. VGA Connector
Connects to one end of the included VGA cable, and
-
the other end to the VGA or DVI port on your display
5. Power Plug
Power adapter socket
-
6. RESET Button
Association history can be erased by pressing and
-
holding this button for 10 seconds. (Please visit P.54
for details)
7. HOST Button
This button is used to select a different Wireless USB
-
Transmitter. (Please visit P.53 for details)
8. Mini-B USB port
In wireless mode, this port is used for cable
-
association. (Please visit Appendix for details)
In wired mode, connect the VGA adapter with the
-
USB cable via this port for wired operation. (Please
visit P.55 for details)
9. WIRELESS/WIRED switch
Choose from wired or wireless mode by using this
-
switch - P.55