IBM Asynchronous Color Terminals WS525 - Manual (Page 10)

Installation and Set-Up
1.1 Installation
1.1 Installation
Connect the cables to the system box.
6
K
7
4 1 AC 2 3
5
Comm 1,
✁
Comm 2,
✂
Comm 3 (Serial printer),
✄
Keyboard,
☎ Kensington lock socket,
✆
Parallel printer,
✝
Monitor
Connect the cables to the monitor.
Check your monitor manual for correct installation.
Push the system box and monitor power switches on.
A green light in the switch indicates that power is on.
Power Up Selftest
The terminal takes a few seconds to warm up and complete its power
up self-tests. Then, the terminal should display ‘‘ Selftest OK.’’ If a
problem occurs, go to the Appendix A.
1–2 Installation and Set-Up