Iiyama PROLITE T1530S - Manual (Page 14)

ENGLISH
11 OPERATING THE MONITOR
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 26. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 15 for SCREEN ADJUSTMENTS.
( ( ( ( (
Press the Menu Button to start the On Screen Display feature. There are
additional menu pages which can be switched by using the
/ Buttons.
NOTE
Use the +/– Buttons to change the vertical position settings. The vertical position of the overall
display should be changing accordingly while you are doing this.
B B B B B
Use the +/– Buttons to make the appropriate adjustment or setting.
Adjustments for Clock, Phase and Position are saved for each signal timing. Except for these
adjustments, all other adjustments have only one setting which applies to all signal timings.
„
For example, to correct for vertical position, press the Menu Button. Then, select (V-
POSITION) by using the / Buttons.
Any changes are automatically saved in the memory when the On Screen Display disappears.
Turning off the power should be avoided while using the Menu.
„
1280x1024
Adjustment icon
Menu page
ANALOG
EXIT SELECT
Page Page
CONTRAST
BRIGHTNESS
VOLUME
AUTO TUNE
H-POSITION
V-POSITION
LANGUAGE
EXIT
1280x1024
ANALOG
EXIT SELECT
Page Page
CONTRAST
BRIGHTNESS
VOLUME
AUTO TUNE
H-POSITION
V-POSITION
LANGUAGE
EXIT
The bar shows
the progress of the
adjustment being made.
Direct
z Key Lock Mode:
With the power is off, press the Button while pressing the Power Switch will switch the Key
Lock Mode On to Off. Adjustment items are locked out when the Key Lock Mode is active.