IBM Dual AMD OpteronTM SFF Barebone ZMAXdp - Manual (Page 58)

IWILL ZMAXdp
58 User’s Manual
IMPORTANT
The BIOS does NOT automatically save values that you have modified. If you do not save your
values before you exit the BIOS Setup Utility, all your changes will be lost.
If after making and saving system changes with the BIOS Setup Utility, you discover that your
computer is no longer able to boot, the AMIBIOS® supports an override, which will reset your
system to the Failsafe defaults. If that fails, it is possible to manually clear the present CMOS
information through the "Clear CMOS Header" on the motherboard (Refer to Jumper Settings for
more information).
The best advice is to ONLY alter settings that you thoroughly understand. The default settings
have been carefully chosen by AMIBIOS® to provide the maximum system performance and
reliability. Even a slight change to the chipset setup may cause potential and unpredictable failure
to the system.