Intel D865GBF - Manual (Page 77)

Using the BIOS Setup Program
77
Hard Disk Drives Submenu
Main Advanced Security Power Boot Exit
1 st Drive [xxxxxxxxxxxxx]
2 nd Drive [xxxxxxxxxxxxx]
3 rd Drive [xxxxxxxxxxxxx]
4 th Drive [xxxxxxxxxxxxx]
Specifies the boot
sequence from the
available devices.
Select the boot device
with UpArrow or
DownArrow key. Press
Enter to set the
selections as the
intended boot device.
ARMD = ATAPI Removable
Media Device.
m o Select Screen
n p Select Item
Enter Select
` Sub-Menu
F1 General Help
P9 Setup Defaults
F10 Save and Exit
ESC Exit
The submenu shown in Table 34 is for setting hard disk drives.
Table 34. Hard Disk Drives Submenu
Feature Options Description
1
st
Hard Disk Drive
(Note)
Dependent on installed
hard drives Specifies the boot sequence from the available hard disk
drives. To specify boot sequence:
1. Select the boot device with <
↑> or <↓>.
2. Press <Enter> to set the selection as the intended
boot device.
Note: This boot device submenu appears only if at least one boot device of this type is installed. This list will display up to
12 hard disk drives, the maximum number of hard disk drives supported by the BIOS.