Integra DPC-7.5 - Manual (Page 17)

17
Connecting the DPC-7.5 —Continued
This section explains how to connect the DPC-7.5 to your TV
or projector.
In this hookup example, the TV handles the audio and video.
If your TV has a Dolby Pro Logic decoder built-in, you’ll be
able to enjoy DVDs and videos that bear the Dolby Surround
logo.
To enjoy Dolby Digital or DTS (5.1-channel surround),
you’ll need a compatible decoder (see page 18).
The DPC-7.5 has three types of video output: component
video, S-Video, and composite video. Component video
offers the best picture quality, so if your TV supports it, use
a commercially available component video cable to connect
the DPC-7.5’s COMPONENT video output to the compo-
nent video inputs on your TV. If your TV supports progres-
sive scanning, you must use component video in order to take
advantage of that feature.
S-Video offers better picture quality than composite video,
so if your TV supports it, use the supplied S-Video cable to
connect the DPC-7.5’s S VIDEO output to an S-Video input
on your TV. Failing that, use the supplied composite video
cable to connect the DPC-7.5’s VIDEO output to a composite
video input on your TV.
Notes
• Before making any connections, turn off the DPC-7.5 and
your TV and disconnect their power cords from the wall
outlets.
• Also refer to the connection information supplied with
your TV.
• Connect the DPC-7.5’s video outputs directly to your TV.
Don’t connect a VCR or other video equipment in between
your DPC-7.5 and TV. Doing so may result in picture dis-
tortion, because of the copy protection system used on
DVD-Videos.
• When you use the analog audio outputs, don’t play DTS
CDs and don’t select DTS soundtracks on DVD-Videos.
Doing so will produce unpleasant digital noise, which may
damage your equipment.
• If your TV or projector has BNC component video inputs,
use a BNC component video cable to connect them to the
DPC-7.5’s BNC component video outputs.
Connecting Your TV or Projector
1 Turn off the DPC-7.5 and your TV, and dis-
connect their power cords from the wall out-
lets.
2 Connect the DPC-7.5 to your TV as shown.
3 When you’ve completed all connections, see
“Powering Up & Setting Up the DPC-7.5” on
page 21.
MODEL NO. DPC-7.5
DVD CHANGER
AC INLET
S VIDEO
VIDEO
REMOTE CONTROL
L
R
DIGITAL
OPTICAL COAXIAL
ANALOG
COMPONENT 2
COMPONENT 1
OUT
IN
P B Y P R
P B Y P R
IR
VIDEO OUTPUT
RS 232 AUDIO OUTPUT
AUDIO OUTPUT
L
R
ANALOG INPUT S VIDEO IN
Y
IN
P B
P R
VIDEO IN
AV RCA/phono
cable (supplied)*
1
(yellow)
(yellow)
(white)
(white)
(red)
TV or projector
(red)
S-Video cable
(supplied)*
2
Component video
cable*
3
Only one connection required!
Choose component video,
S-Video, or composite video.
Signal flow
*1 The DPC-7.5 has two composite video out-
put connectors and two pairs of stereo ana-
log audio output connectors. They output the
same video and audio signals respectively.
*2 The DPC-7.5 has two S-Video output con-
nectors. They output the same video signal.
*3 The DPC-7.5 has two component video out-
puts. The COMPONENT 1 output uses
RCA/phono connectors. The COMPO-
NENT 2 output uses BNC connectors. They
output the same video signal.
✱✷✰-✪.★ ✱✽✱ ✰❉❂n❈❆❍ ✷❂❈❆ ✤✪ ✻❑❆■❅❂❖, ✳❆❃❍❑❂❍❖ ✤✣, ✥✣✣✧ ✤✣:✤✤ ✮M